New South Wales, Australia
[ f2.8—1/50s—ISO 194 ]
f I was on a cli;'s edge that was already
around 150 to 200 feet above sea level. To
get the desired elevation, I only needed
to take the drone up to about 50 to 100
feet above the timber boardwalk from
where I stood. To provide depth, I layered
this image by dividing it into two elements:
land and sea. I adjusted the yaw to turn the
drone so that the cli; face runs through
the frame as a diagonal from the bottom
left to the top right corner. Finally, I walked
forward to position myself into the frame.
;is allowed me to provide the viewer with
an overall sense of height and scale.